Your Dreams Take Flight - Gelatos Tutorial

Hello I'm back to share a new +Papermilldirect  DT project and step by step with you.  This week I'm testing out the new Papermilldirect Hopsack textured card along with some Gelatos to create a backgound for my Kite themed card.

Gelatos are a creamy soft medium that come in packaging that's a little like lipbalm! Take off the cap, twist them and they are ready to use direct to card etc, you can also apply with fingers, sponges, brushes and being water-soluable can be used to add colour to your projects in different ways, today I'm blending them with a baby wipe as this is an easy way to blend and dilute the colours without adding lots of water making them ideal for working on cardstocks without warping or pilling.

Step By Step:

Cut a piece of Papermilldirect White Hopsack textured cardstock approx 4 1/2" square. Scribble across the top using blue Gelatos (I'm using 2 shades of blue).  Take a baby wipe and blend the colours across the cardstock using circular motions, you'll see they blend so easy and you can scribble in extra colour if you need to.

 

Continue working down your square of hopsack card scribbling lines of different colours across and blending each time with a baby wipe until the panel is completely coloured.  I'm graduating from the blue through pink, orange, yellows and greens but you can use less colours if you wish.

Using black memento ink, stamp a decorative diamond stamp (Oak House Studio) onto PMD white Hopsack card.  Have fun colouring in your stamped image using alcohol markers (I'm using a selection of First Edition markers)

Add highlights or extra details to the diamond using a white gel pen.  Stamp sentiment words onto white hopsack card using black Archival ink.  The words I'm using are from Oak House Studio and I have cut the phrases to give individual words of: Your, Dreams, Take, Flight to fit with my Kite theme, ypu could of course use your own wording and either stamp or print out to suit your theme.

Create a card blank by scoring and folding an A4 sheet of PMD white hammered cardstock, trim down to create a square cardbase that will be just under 6"x6". Mount gelato panel onto a slightly larger square of PMD black card using d/s tape and then again centrally onto the card front.  Use d/s tape and glue to attach a length of blue & white twine to the Diamond to turn it into a kite. Use a black pen to outline each stamped word.

I have used a white chalk ink to stamp some subtle circles onto the gelato background, just to add a little extra depth before attaching the kite using 3D foam pads.  Tie pieces of twine onto kite string and trim to create ribbons, dabs of glue will hold the twine in place on the card front.  Using a clear drying glue, arrange words to spell out the sentiment and glue in place.

Gelatos are a fun way to add colour and can be blended with your fingertips or diluted with water or added to other mediums as well as being used with a small brush to add colour to your stanped images, you can even use them to stamp with too.  I love how easily they blend on the Papermilldirect Hopsack textured card to create quick and colourful backgrounds. 

Materials List:

White Hopsack Card - Papermilldirect

White Hammered Card - Papermilldirect

Smooth Black Card - Papermilldirect

Decorative Diamond Stamp - Oak House Studio

Sentiment words & Circles - from stamp sets - Oak House Studio

Alcohol Markers - First Edition

Black Memento Inkpad, Black Archival Inkpad, White Chalk Inkpad

D/S Tape, Clear Drying Glue, 3D Foam Pads

White Gel Pen, Black Fineliner Pen, Babywipes

Gelatos - Brights Set - Faber-Castell

Twist Turn Card - Step By Step Tutorial

Hello, I have a new Step By Step Tutorial to share with you.  This week the Papermilldirect Design Team are working on the theme of ‘Twist Turn’ cards, these are great little cards to make adding an extra fun element to your designs.  There is also a new Special Offer card:  Natural White Matt 260gsm which I am using to make my Twist Turn card this week:

Step By Step:

There are lots of videos and instructions online for Twist Turn cards, (this version is adapted from the June Issue of Quick Cards magazine) Trim an A4 sheet of PMD Natural White Matt (special offer card) to measure approx. 21.5cm x 14cm.  Daw a central line across the sheet, then mark a line down at 7cm and another at 10cm.  Draw the diagonal lines from 7cm to centre line at 10cm and do the same in reverse for the bottom diagonal.  Score and fold all lines: the 7cm line down will be a mountain fold, the 10cm line down will be a valley fold. The small diagonals will be mountain fold. And the centre score will be mountain fold to create the card base.  Crease folds firmly using a crease mouse or flat scoring tool.

Take a pieces of PMD Natural White Matt card and watercolour, I’m using Peacock Green Colour Chemistry inks and a water brush.  Add random spatters of Jubilee Blue and Vintage Sepia inks by flicking them from the end of a brush.  Blot with a paper towel, then leave to dry or use a heat gun for speed.

Stamp text onto 1 piece of the water coloured card using Triple Blue Skies inkpad to give an ombre effect.  I am using the OHS ‘English Garden Words stamp’ as it is a nice size to fit the card panels.  Leave to dry or speed up using a heat gun.

Using versamark ink, stamp a medium sunflower image onto scrap PMD Natural White Matt card and sprinkle with gold detail embossing powder.

Tip off excess embossing powder and pour back into pot for next time.  Use a heat gun to heat emboss the image until all the powder has melted and it has turned a lovely gold colour.  Colour the sunflower with shades of yellow and orange, I’m using the Triple Sunshine Yellows inkpad, along with Citrus Yellow, and Juicy Orange inks.

Continue adding as much detail to the sunflower as you wish with the inks, I have used a reddish brown colour ink to make the centre darker and add more shading to the petals.  Add a colour wash around the outside edges and when dry cut around the sunflower using scissors or craft knife.

Ink around the card base edges and outer folds using orange inks to add definition.  Trim the text stamped panel to approx. 10.5cm x 6.5cm and adhere to card front, add a matching panel (without text) to the back, adhere using d/s tape and /or glue.  Add 6.5cm squares of water-coloured card to the 2 square panels and small triangles to the LH inner folds if desired.

Diecut a ‘Thanks’ sentiment from PMD Black Card and add to text panel using glue to adhere.  Add 3D foam pads to back of sunflower and add to the front square of the twist turn card.

I was really impressed with how the Papermilldirect Natural White Matt card takes the watercolour inks and the heat embossing with no pilling or warping,  it scores and folds beautifully and is a perfect weight for these card styles, so it’s a versatile all round card to have in your stash.

Have you made any Twist Turn cards using papermilldirect cardstocks?, don’t forget to post your makes over on the PMD facebook page, so we can take a peek, Angela x

Materials Used:

Natural White Matt Finish Card - Papermilldirect

Smooth Black Card - Papermilldirect

English Garden Words Stamp - Oak House Studio

Medium Sunflower Stamp - Oakhouse Studio

Triple Pigment Ink Pads, Pure Colour / Colour Chemistry Inks - Oak House Studio

Gold Detail Embossing Powder - Oak House Studio

Thanks Word Die - Clearly Besotted

Plus: Versmark Inkpad (or embossing inkpad), D/S Tape, Glue, 3D foam pads

You Colour My World - Guest Blogging with Oak House Studio

Hello, I'm back again to share a simple card design step by step created with Oak House Studio products. I was invited to Guest Blog for OHS and this is my 3rd project.  

 (I would also like to enter this card into the July Make It Take it Challenge over at Craft Stamper Magazine, which is an 'Anything Goes' theme this month)

As the theme this month is Rainbow Colours I thought I would make use of those fabulous Triple Ink pads, there are enough to cover the whole rainbow.  I started by stamping circles onto white card, using the lightest 2 colours in each of the triple colour ink pads.  (The circle stamp I have used is from the Flowers & Circles stamp set but I notice that a brand new set of Circle College stamps has just appeared in the Oak House Studio Shop, perfect timing!!)  I stamped a butterfly onto each circle using the darkest shade from each of the 5 triple ink pads so that each circle was colour coordinated and when dry I used a circle die to cut out which also left a little white border all around.

 The card base is simply an A4 sheet of Papermilldirect White Linen card, one of my favourite card textures, scored, folded and trimmed to approx. 7” x 5” card base.  I chose the sentiment stamp ‘You Colour my world’ stamping the words in black Memento ink along the bottom of the card base, apart from the word ‘Colour’ which was fun to stamp using the triple inkpads to give a rainbow effect to the word.

To coordinate with the black ink and add definition to the circles I cut an extra panel of white linen card approx. 3” x 7” and matted onto black card to give a small black border top and bottom, adding to card front using d/s tape and trimming edges flush with card.

To create extra interest with a raised effect I added 3D foam pads to the back of each circle.

Position circles onto card front panel with butterflies in different positions and circles overlapping slightly, when happy with positioning remove backing from foam pads and press into place. I found it easier to stick down the first circle and the last one before adding the others.

 I’ve tried to keep this card CAS (clean & simple) with lots of white space and confining the colour to circles, it can easily be adapted using other stamps such as flowers in place of the butterflies or by using some of the other sentiments in the stamp set. 

Products used:

Flowers & Circles Stamp Set

You Are My Rainbow Stamp Set

Three Butterflies Stamp Set or Butterfly Bundle

Colour Chemistry Triple Inkpads (fruity reds, sunshine yellows, meadow greens, sky blues, berry purples)

Also, Plain White Card, black card, & White Lineneffect card – Papermilldirect

Black memento ink

d/s tape, 3D foam pads

 

 Challenges Entered:
July Make It Take it Challenge 'Anything Goes' at Craft Stamper Magazine

Enjoying the Possibilities - Guest Blogging with Oak House Studio

 

Hello again, I have been Guest Blogging over at Oak House Studio this month and have my 2nd project to share with you. I’ve been thinking about Lynnda’s recent post, about her stamps being not just images, but being possibilities.  I looked at the stamps and realised that they are indeed possibilities, possibilities to be creative however you wish.  

So with this newly realised freedom the Dress Form stamp evolved into an imaginative and colourful dress, with butterfly sleeves and a daisy vellum ruffle hem, using lots of different colours for this week’s theme of ‘rainbows’.  

 (I would also like to enter this card into the July Make It Take it Challenge over at Craft Stamper Magazine, which is an 'Anything Goes' theme this month)

I started by painting a 5” x 7” canvas with Gesso to prime it before applying Colour Chemistry inks in Citrus Lemon, Jubilee Blue and Pumpkin.  Stamping circles and triangles with the Triple Sky Blues inkpad and adding extra highlights by stamping with white acrylic paint and using a baby wipe to blend and distress in places.  

The dress Form and butterfly were stamped in Versamark onto hammered card and then heat embossed using the OHS Gold detail embossing powder.  I used a paintbrush to water colour the dress form using Paris Pink and French Lavender Colour Chemistry inks, with Peacock Green and French Lavender for the butterfly.  I also stamped small circle details to the dress form using Triple Sky Blues inkpad and used a white gel pen to add dots and highlights.

For the ruffle skirt I stamped one of the large Double Daisy stamps onto plain white vellum and heat embossed with the gold detail powder, using a paintbrush to watercolour the petals with orange colour chemistry.  Dress was assembled with glue by cutting butterfly in half and attaching each wing to each shoulder of body form, and the daisy vellum was cut out and added to bottom to create a ruffle skirt.   I shaped the completed dress in my fingers, added a pale pink organza ribbon and heart shaped pin before adding some foam pads behind the body to shape it before attaching to the canvas with glue.

 The ‘Creativity Never Goes Out of Style’ sentiment stamp was stamped onto hammered card, that I’d previously water coloured and over stamped. I  heat embossed with gold and cut it into 3 parts. Inked around edges with blue ink from the Triple Sky Blues and then glued into position onto the canvas.

I had so much fun making this project and felt the sentiment was very apt, the Oak House Studio inks and stamps were a joy to use as always, and I even discovered a new favourite embossing powder along the way.  Lots of future possibilities indeed.  

 Challenges Entered:
July Make It Take it Challenge 'Anything Goes' at Craft Stamper Magazine

 

Products used:

Dress Form Duo

Creativity never goes out of style

Double Daisy Set Updated

Medium Charming Butterfly

Texture Elements

Gold Detail Embossing Powder

Triple Sky Blues Inkpad

Pure Colour Chemistry Inks

5” x 7” Canvas

Hammered Card - Papermilldirect

Plain Vellum

Glue

If you enjoy stamping and playing with inks, or if you fancy having a dabble for the first time, then don't forget to head on over to the Oak House Studio blog where you will find lots of inspiring projects and makes.

Stampbord Butterfly Card - Guest Blogging with Oak House Studio

Hello, I'm back again with a new post after my little break from blogging. I was so thrilled to be asked by Lynnda at Oak House Studio to contribute to her blog as I do love Oak House Studio products, especially the stamps and Inks.  The theme this month is colours – rainbows and there are certainly plenty of gorgeous vibrant colours to choose from in the Colour Chemistry inks range.  To challenge myself, I thought I would try Stampbord, I’ve seen it, read about it but never tried it before, so today’s project is my very first play. (I would also like to enter this card into the July Make It Take it Challenge over at Craft Stamper Magazine, which is an 'Anything Goes' theme this month)

I started by adding a colour wash of Paris Pink to the surface of the stampbord, then I used a wet brush to flick and tap French Lavender and Pumpkin inks randomly onto the surface, and dragged lines from some of the splashes using a ‘pokey’ tool.

I stamped a butterfly and heat embossed with the fabulous Silver detail powder.  Added extra colour using a paint brush loaded with French lavender ink.   Using the Triple Berry Purples inkpad to stamp ‘Dream’ under the butterfly and some random dottiness with a white pen and the stampbord panel was finished.

 I used both Peacock Green and Jubilee Blue inks to create a colour wash background panel, flicked with water and then used a paper towel to dab and lift colour in places, adding extra texture by stamping with the little dotty textures stamp.  Texture Element stamps were used on 2 corners to ‘frame’ the panel, the Triple Berry Purples inkpad for this and also added ‘Follow Your’ to top corner.  I used a white pen again to highlight some of the stamping in the corner elements. 

To assemble the card, I created a card blank by scoring & folding white leather card, I mounted the background panel onto black card and then to card front.  The stampbord panel has also been matted onto black card before attaching to the card front.  To finish I added a few bright sequins. I love the colours in this card, the way the Peacock Green really makes the Paris Pink ‘pop’, it’s a combination that I find very uplifting.  I think what I really like about Oak House Studio products is that you don’t have to be the world’s best stamper to achieve results you can be happy with, the products are such a great quality that you don’t need the expensive stamping tools to achieve a good stamped impression, the inkpads are juicy and rich and the Colour Chemistry inks give fabulous results. 

Here is what I used:  
From Oakhouse Studio www.oakhousestudio.com
Charming Butterfly

Texture Element Stamps

Textures from updated Double Daisy stamp set

Peacock Green, Jubilee Blue, Paris Pink, French Lavender, Pumpkin

Triple Berry Purples Inkpad

Silver Detail embossing powder

Stampbord

From Papermilldirect  www.papermilldirect.co.uk/paper-card

Black Card
White Card
White Leather Embossed Card

Plus:
d/s tape,glue,sequins

Challenges Entered:
July Make It Take it Challenge 'Anything Goes' at Craft Stamper Magazine

Fathers Day Card - Step By Step Tutorial

Hello, sorry I'm running a little late with another blog update for you.  This week the Papermilldirect Design Team are working on ideas for Father’s Day cards and I have been playing with ink and dies again for this cog themed make.

Step by Step:
Take Papermilldirect Plain White cardstock and apply Vintage Sepia & Juicy Orange Colour Chemistry inks.  I used a foam make up sponge and also a water brush to randomly apply the inks to give a mottled effect.  Leave to dry or use a heat gun

Die cut a variety of cog shapes from the inked card.  Using a spray bottle to spray the cogs with Glorious Gold Colour Chemistry Ink or use a brush if you don’t have a spray.

Ink up another piece of Papermilldirect Plain White card as before, but this time applying Jubilee Blue & Tempting Teal Colour Chemistry Inks.  Dry fully before die-cutting 2 geometric trims and letters to spell out ‘DAD’.  Also cut the ‘DAD’ letters from Papermilldirect Navy Blue card.

Cut a piece of PMD Plain white card approx. 4 ¾” square and mat onto a piece of PMD Navy Blue card approx. 5” square, using double sided tape to adhere.  Glue the 2 blue inked geometric trims to card front using cosmic shimmer clear drying glue.

Work out your desired positioning of the cogs, with the DAD sentiment running across the centre.  When you’re happy with position, glue in place with clear drying glue.  Create a card base by scoring and folding an A4 sheet of PMD Plain White card in half, then trim down to just under 6” square.  With card fold across the top, add the completed panel using 3D foam pads to give height.

I really liked the fresh look of the Papermilldirect Plain White card against the inked elements and thought the cogs and geometric die cuts would be great for a masculine make. The gold spray added a subtle metallic element to the cogs and I really like the mix of blues and oranges together for a modern look.  I haven’t used ‘Father’s Day wording on the front as I wanted this card to be suitable for other occasions such as birthdays too and an extra sentiment could be added inside if required.

Materials Used:
Plain White Card – Papermilldirect
Navy Blue Card – Papermilldirect
Vintage Sepia, Juicy Orange, Jubilee Blue, Tempting Teal, & Glorious Gold – Colour Chemistry Inks – Oak House Studio
Cog Dies #FEDIE009 – First Edition
Alphabet Dies #FEDIE007 – First Edition
Tuck In Geometric Dies #ETL172 – Tattered Lace
Adhesives Used: Cosmic Shimmer glue, D/S Tape, 3D Foam Pads

Inked Gate Fold Card - Step By Step Tutorial

Hello, sorry I'm a little late posting my Papermilldirect DT make.  This week the Design Team are working with the theme of Gatefold Cards, for my version I am using a simple 2 fold design but adding extra interest with a 2 part heart flap and some random inking.  This is a very easy method, no stamping or heat embossing is involved, just simple colour-washing and splashing of water to create a random effect. This simple technique is not only ideal for those who are maybe not confident with stamping but also for those who just want to play with ink!!

Step By Step:

Cut Papermilldirect Plain White cardstock to approx. 28cm long x 14cm.  With long side across scoring board, score at 7cm and 14cm and use a bone folder or scoring tool to fold the card into a gatefold shape.

Die-cut a scallop heart shape from papermilldirect White Linen card using a nesting heart shaped dies, centre a smaller heart die inside the shape and secure using low tack tape before cutting again to give a heart shape frame.  (Keep the inner shape for inside the card later)

Cut 3 panels from PMD White Linen: 1 approx. 13cm x 13cm and 2 panels approx. 6cm x 13cm. (Alternatively start with 1 sheet and cut to size after inking if you prefer).  Apply Oak House Studio Colour Chemistry ink in Peacock Green (if using the pure inks you will need to water it down) using a make-up sponge or craft sponge, just swipe the ink over the surface to colour and add a little water if needed to colour wash.

Add Oak house studio inks in Paris Pink and Regal Claret, swiping randomly across the linen cardstock (again water down the inks if you are using the pure colour versions).  Use a paintbrush or your fingers to splash or sprinkle water onto the panels and then blot with kitchen towel.  (I also inked an extra scrap piece of card with just Peacock Green so I could die cut a sentiment to co-ordinate)

When dry, mat the 3 inked panels onto slightly bigger Papermilldirect Dark Violet card to leave a small even border all around.  Adhere the large panel inside the card and the small panels to the outside using a combination of double sided tape and glue to allow a little ‘wriggle time’ for lining up.

Die cut Hearts to decorate (I’m using Tattered Lace Tuck-ins) from PMD White linen and have snipped into them to cut them down a little (keep waste)  glue to front panels using Cosmic Shimmer clear drying glue.  Take the heart frame and carefully glue to left hand side of Gatefold card, positioning it centrally over the card opening and adding glue only to the LH side where it will attach to the left panel, leave RH side free.

Cut a smaller nesting heart from PMD White Linen and smallest heart from inked scrap card and layer on top using glue.  With the gatefold card closed position this smaller layered heart centrally into the heart frame to check positon, then apply glue carefully only to the RH side where it will adhere to the RH side panel leaving the LH side free.  You will now have a card that opens with a frame on LH side and heart on RH side.  Cut sentiment twice, once from scrap inked card and once from PMD Dark Violet card, I’m using a First Edition sentiment of ‘Be Happy’ and have snipped into it to separate the words.

Take the smaller heart (Waste from Heart Frame) and positon it inside the card using the front heart frame to help line it up if you wish.  Glue in place inside card using clear drying glue.  Layer up the sentiment offsetting the Dark Violet as a shadow and gluing in place on inside heart panel.  To finish add extra heart motifs from the snipped waste or die cut extra to decorate as desired.

I really love the random inking effect and the contrast of the white card and diecuts in this design.  Although I have used nesting hearts you could use any shape nesting dies and different sentiments, experimenting with different coloured inks too.  Have you made gatefold cards recently?  Or perhaps you like inking onto Papermilldirect cardstocks too?

Materials List:
Plain White Card, White Linen Card, & Dark Violet Card - Papermilldirect
Peacock Green, Paris Pink, & Regal Claret - Colour Chemistry Inks - Oak House Studio
Hearts Scallop #657562 -  Framelits Dies - Sizzix
Modern Sentiment Dies #FEDIE038 - First Edition
Tuck In Hearts Dies #ETL173 - Tattered Lace
D/s tape, Cosmic Shimmer glue